Warning: Illegal string offset 'html' in /home/nissansi/public_html/forums/cache/skin_cache/cacheid_1/skin_topic.php on line 907
Ultimate Turbo Reference guide for Nissans. - Hardtuned.net - Page 4

Jump to content


Ultimate Turbo Reference guide for Nissans. 

474 replies to this topic

#91 lyckaon

  • Joined:17-January 07
  • Car:200sx / CA18det

Posted 09 May 2008 - 08:52 PM

Make and model: 200sx S13 EDM
Size of engine: 1.8L
Modifications to the car: Apexi pod filter, SSA FMIC, Greddy RS bov, 534cc injectors, walbro fuel pump, Nistune, hypergear exhaust manifold, 3" homemade turbo back exhaust
Type of turbo: TR28kai
Trim of turbo: 55
Rear Exhaust housing: .86
When does vehicle begin boost: 2000-2500 rpm
When does vehicle reach full boost and what PSI: 3500 rpm 17 psi
Does the vehicle have Cams? NO
What brand:
What lift/duration etc:
Max power achieve at what boost: +300 crank HP at 17 psi

#92 marks14

  • Joined:01-October 07
  • Car:180sx

Posted 12 May 2008 - 12:38 PM

Make and model:1993 180sx
Size of engine:2.0
Modifications to the car:fmic, turbo back exhaust, pod, bleed valve boost controler. Stock ecu, injectors and pump.
Type of turbo: KKR 380
Trim of turbo:48
Rear Exhaust housing:.86
When does vehicle begin boost:
When does vehicle reach full boost and what PSI:
Does the vehicle have Cams? if so;no
What brand:
What lift/duration etc:
Max power achieve at what boost:192rwkw 0.9 bar.

#93 Sidewayz180

  • Joined:19-June 06
  • Location:Australia VIC
  • Car:180sx

Posted 12 May 2008 - 03:13 PM

View Postmarks14, on May 12 2008, 02:21 PM, said:

Make and model:1993 180sx
Size of engine:2.0
Modifications to the car:fmic, turbo back exhaust, pod, bleed valve boost controler. Stock ecu, injectors and pump.
Type of turbo: KKR 380
Trim of turbo:48
Rear Exhaust housing:.86
When does vehicle begin boost:
When does vehicle reach full boost and what PSI:
Does the vehicle have Cams? if so;no
What brand:
What lift/duration etc:
Max power achieve at what boost:192rwkw 0.9 bar.

192rwkw with stock injectors and fuel pump? that can't be right.

#94 marks14

  • Joined:01-October 07
  • Car:180sx

Posted 13 May 2008 - 12:04 AM

Attached Image: dyno.JPG

I was suprised. Was expecting only 170 or so. Car made 156 with standard turbo @ 1 bar. (Different dyno) Guys at the workshop were suprised too. Happy days though! Other graph on the sheet was car with standard turbo and leaking gasket boosting to only 0.7 bar.

#95 01010011

  • Joined:15-April 07
  • Location:Australia VIC

Posted 25 May 2008 - 03:44 PM

Make and model: S15
Size of engine: 2.0LTR
Modifications to the car: ECU, EBC, FMIC, 3inch full exhaust, fuel pump.
Type of turbo: Stock
When does vehicle begin boost: 2000 rpm
When does vehicle reach full boost and what PSI: 3500 rpm 16 psi
Does the vehicle have Cams? NO
Max power achieve at what boost: 180rwk @ 16psi

Attached Thumbnails

  • Attached Image: P4150018.JPG


#96 Guest_HyperGear Turbochargers_*

Posted 27 May 2008 - 08:15 PM

Size of engine: 2.5LTR 1JZ
Modifications to the car: ECU, FMIC, 3inch full exhaust, fuel pump.
Type of turbo: HyperGear TR44HF
When does vehicle begin boost: 2000 rpm
When does vehicle reach full boost and what PSI: 4000 rpm 17 psi
Does the vehicle have Cams? NO
Max power achieve at what boost: 285.9rwkws

Power curve
Posted Image

Boost Curve
Posted Image


TR44 powered 1JZ 11 Sec Drag pass footage from last week.
Posted Image

#97 project-s13

  • Joined:18-December 06
  • Location:Australia QLD
  • Car:S13 & Mk1 Escort

Posted 01 June 2008 - 02:38 PM

MAKE AND MODEL: S13 SIL
SIZE OF ENGINE: 2.0 ltr sr20
MODIFICATIONS TO CAR: built engine, haltech, 850cc, greddy plenum, cam gears
TURBO: GT3082R
REAR HOUSING:0.82
WHEN DOES TURBO BEGIN TO BOOST? 3000rpm
WHEN DOES TURBO HIT FULL BOOST AND WHAT PSI? 4200rpm at 18psi
CAMS? hks step 2, 264 in 272 ex
MAX POWER AT WHAT BOOST? 308kw at 18psi

#98 Guest_180nikka_*

Posted 05 June 2008 - 09:24 PM

Make and model: 92' 180sx
Size of engine: ca18det
Modifications to the car: FMIC, Pod filter, BoV
Type of turbo: T25
Trim of turbo: -
Rear Exhaust housing: -
When does vehicle begin boost: 3,000RPM
When does vehicle reach full boost and what PSI: 9PSI at 4,500
Does the vehicle have Cams? if so;
What brand:
What lift/duration etc:
Max power achieve at what boost: 148rwkw stock boost ( 9PSI )

#99 slinga

  • Joined:14-February 05
  • Location:Australia VIC

Posted 05 June 2008 - 09:35 PM

View Post180nikka, on Jun 5 2008, 12:07 PM, said:

Make and model: 92' 180sx
Size of engine: ca18det
Modifications to the car: FMIC, Pod filter, BoV
Type of turbo: T25
Trim of turbo: -
Rear Exhaust housing: -
When does vehicle begin boost: 3,000RPM
When does vehicle reach full boost and what PSI: 9PSI at 4,500
Does the vehicle have Cams? if so;
What brand:
What lift/duration etc:
Max power achieve at what boost: 148rwkw stock boost ( 9PSI )


on stock boost???


:lol: :lol: :lol:

#100 Guest_HyperGear Turbochargers_*

Posted 10 June 2008 - 08:44 PM

Make and model: S13 silvia
Size of engine: 1.8L
Modifications to the car: Internals, cams, injectors, turbo, cooler, exhaust
Type of turbo: HyperGear TR43HF
Rear Exhaust housing: .63
When does vehicle begin boost: 2000RPM, 7PSI@3000, 22psi@5100RPM
Does the vehicle have Cams: Yes
What brand: Tomei 270/10
Max power achieve at what RPM: 307rwkws @ 784N.M @6800RPM

Posted Image

Dyno footage:


#101 niscort

  • Joined:16-November 03
  • Location:Australia TAS
  • Car:niscort

Posted 10 June 2008 - 09:19 PM

why 2 different correction factors? what rpm is peak hp? and positive boost at 2000rpm with 270deg cams... are you serious?

#102 Guest_HyperGear Turbochargers_*

Posted 10 June 2008 - 10:00 PM

He got in there with 198kws and drove out with 307rwkws the car had timming issues on the start. forgot to add rpm lol. This tune was based on a 230rwkws remap of a TR43 standard, Well we can't remap, it was alter with a AFC which allowed more Fuel and we played with timing. There's probably another 10~20kws more in it, waiting for a Nistune chip. But either way the TR43HF running .61 was designed to be a high responds turbo of its HP range. This paticular turbo has been drifted for a year now, will be entering this month Winton.
PS. this car has been running our new designed Toll/control arms as well as had our new manifold which didn't glow at 22psi.

Niscort: This is not a chatting thread so I'll put your request here. Turbo responded from 2000 - 5300 Its been updated already. The older manifold did glow even at 16psi, as you can see from footage below They are no longer been sold.

http://au.youtube.co...h?v=SxHkjvz6B8g

The new one is made from 3.4mm mild steel at a local exhaust shop. It doesn't looks as nice and shinny from out side but worked nicely.

#103 niscort

  • Joined:16-November 03
  • Location:Australia TAS
  • Car:niscort

Posted 11 June 2008 - 06:58 AM

right.. so no answers

lol 22 dyno runs over 2 hours and your new designed manifold back in 2005 didnt even glow...

#104 SXGIRL

  • Joined:06-November 05
  • Location:Australia QLD
  • Car:96 180sx TypeX

Posted 14 June 2008 - 12:17 PM

Make and model: 1996 180sx Type X
Size of engine: 2.0L
Modifications to the car: Power FC, Forged Internals, 740cc Injectors, Port and Polished Head, z32 AFM, Predator Radiator and Intercooler Kit
Type of turbo: GT2871R
Trim of turbo: 56
Rear Exhaust housing: .64
When does vehicle begin boost: 2100rpm ish??
When does vehicle reach full boost and what PSI: 4000rpm ish?? ( 17psi )
Does the vehicle have Cams? if so; Tomei 270/270
Max power achieve at what boost: 309.8rwhp ( 240rwkw ish?? ) - 17psi

Attached Thumbnails

  • Attached Image: Photo0664.jpg


#105 elza s14

  • Joined:27-August 06
  • Car:Nissan 200sx s14

Posted 29 June 2008 - 04:43 PM

Make and model: 200sx s14
Size of engine:2l sr20det
Modifications to the car:pod,intake,gt2871r,hybrid cooler,microtech lt10s,bosch023,sard fpr,denzo600cc injectors,splitfire coils, eBoost 2,3inch stainless exhaust and stainless manifold
Type of turbo: GT2871r
Trim of turbo:76
Rear Exhaust housing:.86
When does vehicle begin boost:2500rpm
When does vehicle reach full boost and what PSI:4200rpm at 20psi
Max power achieve at what boost:308.5hp/230kw at the wheels

All tuning done by Justin at Blacktrack Performance (rx Engineering )

BY some mirical im making this power with a 100% standard clutch :o

Edited by elza s14, 04 July 2008 - 09:35 AM.


#106 H-TownDrifter

  • Joined:22-March 08
  • Car:S14 Silvia, sr20det, trust cams, Link Computer, Steampipe Custom Manifold, td05hr 16g 10.5t twin scroll turbo, trust 740cc, 3" str8 exhaust, 500x300x100 ic, custom alluminium intake piping, triple core 45mm alloy radiator, deloomed wiring

Posted 29 June 2008 - 06:21 PM

Make and model: 1994 S14 sr20det in 1989 cefiro
Size of engine: 2.0l

Modifications to the car: Link Computer, trust cams, trust 740cc injectors, evo 5 turbo, intercooler, custom intake piping, 80mm throttle body, standard plenum modified dramatically to suit throttle body, custom steampipe exhaust manifold. Custom dump pipe, custom 3'' exhaust

Type of turbo: Mitsi Evo 5 Turbo. TD05HR 16G6 10.5T

When does vehicle begin boost: 3000RPM, 14PSI@3900, 18psi@4100RPM

Does the vehicle have Cams: Yes
What brand: Trust 256 & 264 @ 11mm lift

Max power achieve at what RPM: 272rwkws on 14psi @7500RPM, 305rwkws on 18psi @7500RPM

Posted Image

Dyno is a Dynapack Chassis Dynomometer hub dyno. It is known to read a little higher than roller dynos bout 10%.

Edited by H-TownDrifter, 10 September 2008 - 09:25 AM.


#107 crono180

  • Joined:13-October 07
  • Location:Australia SA
  • Car:180sx

Posted 10 July 2008 - 10:05 PM

Make and model:180sx
Size of engine:SR20
Modifications to the car:powerFC, 740cc, Z32afm, bleed valve, all other supporting mods
Type of turbo:gt2871r
Trim of turbo:52trim
Rear Exhaust housing:64ex
When does vehicle begin boost:not sure
When does vehicle reach full boost and what PSI:3800ish 16psi
Does the vehicle have Cams? if so;stock
What brand:
What lift/duration etc:
Max power achieve at what boost:217.8rwkw@16psi

I want cams!

#108 Guest_HyperGear Turbochargers_*

Posted 20 July 2008 - 11:13 AM

Size of engine: 2.5LTR 1JZ
Modifications to the car: ECU, FMIC, 3inch full exhaust, fuel pump.
Type of turbo: HyperGear TR44i .69
When does vehicle begin boost: 2000 rpm
When does vehicle reach full boost and what PSI: 4300 rpm 20 psi
Does the vehicle have Cams? NO
Max power achieve at what boost: 296.2rwkws

Power curve
Posted Image

#109 [IB6UB9]

  • Joined:29-December 05
  • Location:Australia SA
  • Car:nissan selina

Posted 20 July 2008 - 01:42 PM

Make and model:S15 200sx adm
Size of engine:SR20DET
Modifications to the car:Fmic,pwrfc,fuel pump,exhaust manifold,avcr,740cc`s,3" exhaust...few other bits and pieces
Type of turbo: T60-1
Trim of turbo:
Rear Exhaust housing:.63
When does vehicle begin boost:3600
When does vehicle reach full boost and what PSI:4800 @ 15psi
Does the vehicle have Cams? if so;NO
What brand:NO
What lift/duration etc:NO
Max power achieve at what boost:231.7rwkw @ 15psi

#110 Guest_HyperGear Turbochargers_*

Posted 29 July 2008 - 09:45 PM

Make and model:Crowna
Size of engine:1JZGTE
Modifications to the car: Cooler, exhaust, injectors, PFC
Type of turbo: TR44
Rear Exhaust housing:.69
When does vehicle begin boost:2000
When does vehicle reach full boost and what PSI:4300 @ 19psi
Does the vehicle have Cams? NO
What brand:NO
What lift/duration etc:NO
Max power achieve at what boost:315.2RWKWs @ 19psi

Posted Image

#111 pubez

  • Joined:08-April 08
  • Car:nissan silvia S13

Posted 27 August 2008 - 07:33 AM

Make and model: S13 silvia
Size of engine:2 ltr
Modifications to the car:ss maniflod, 3inch exhaust turbo back, no mufflers, boost cotroller, cooler, pod, fuel pump, extreme racing flywheel and clutch,
Type of turbo: KKR 380
Trim of turbo:don't no
Rear Exhaust housing:don't no
When does vehicle begin boost:2500
When does vehicle reach full boost and what PSI:5500
Does the vehicle have Cams? if so; nope
What brand:stock
What lift/duration etc:don't no
Max power achieve at what boost: 260 Kw at 14pis

#112 woodso180

  • Joined:14-June 07
  • Car:93' 180sx manual

Posted 28 August 2008 - 06:05 PM

Make and model: SR20DET 180sx
Size of engine:2 LTR
Modifications to the car: Exhaust, FMIC, Pod, EBC, Z32 AFM, PFC, 700cc Injectors, Built Engine
Type of turbo: Trust TD06H-20G
Trim of turbo: Dunno
Rear Exhaust housing: 10cm
When does vehicle begin boost: 3000rpm
When does vehicle reach full boost and what PSI: roughly 4800rpm at 19psi
Does the vehicle have Cams? Yes
What brand: Toda
What lift/duration etc: 272/272(10.5mm)
Max power achieve at what boost: 357hp(265rwkw) at 19psi

Attached Thumbnails

  • Attached Image: Boost_Curve26.08.08.jpg
  • Attached Image: Power_Torque26.08.08.jpg


#113 hectics13

  • Joined:27-December 07
  • Car:nissan s13 silvia

Posted 28 August 2008 - 06:14 PM

Make and model: S13 silvia
Size of engine:2 ltr sr20
Modifications to the car: gcg mainfold, external, 600inj, fuel pump, reg, rail, microtech, plenum, fmic, s14 gearbox, lsd,lightened flywheel, too much to list
Type of turbo: gt3076
Trim of turbo:0.60
Rear Exhaust housing:0.63
When does vehicle begin boost:2000rpm therebouts
When does vehicle reach full boost and what PSI:4500-5000 hard to tell 21psi
Does the vehicle have Cams? if so; nope
What brand:----
What lift/duration etc:-----
Max power achieve at what boost: 262kw's/351.1hp at 21psi

Attached Image: 9_6_2008_1.JPG

#114 TurboTurboSilvia

  • Joined:28-February 06
  • Location:Australia VIC
  • Car:R34 Skyline

Posted 04 September 2008 - 03:23 PM

Make and model: S13 silvia
Size of engine:1.8L CA18det
Modifications to the car: ACL Pistons, 700cc injectors, Tomei cam gears, ported engine head. Fuel pump, Nistune ECU
Type of turbo: HyperGear TR43i with HPVA 38mm External gate
Rear Exhaust housing:0.63
When does vehicle begin boost:2000rpm
When does vehicle reach full boost and what PSI:4500 18PSI
Does the vehicle have Cams? Regrinded stock cams 256/8.9
Max power achieve at what boost: 292rwKW @ 18PSI / 392.3rwHP / 173KPH / 680NM Torque

Attached Image: tr43hfca18292rwkw.JPG

#115 ..DoRiFto..

  • Joined:16-August 08
  • Location:Australia SA
  • Car:SilEighty SR20DET

Posted 04 September 2008 - 06:09 PM

Make and model: 95 180sx
Size of engine: SR20DET 2.0L
Modifications to the car: Front Mount,lightened flywheel
Type of turbo: T28
When does vehicle begin boost: 3000rpm
Max power achieve at what boost: 177.17KW @ 14psi

#116 DVS JEZ

  • Joined:28-October 07
  • Location:Australia NSW
  • Car:R32 GTR

Posted 10 September 2008 - 05:44 AM

Make and model: S13
Size of engine:SR20DET redtop
Modifications to the car: exhaust, FMIC, pod, microtech, gktech SS manifold, 50mm synapse synchronic external wastegate
Type of turbo: Garrett GT2860RS (disco potato)
Rear Exhaust housing: 0.6
When does vehicle begin boost:2,500rpm (ish)
When does vehicle reach full boost and what PSI:approx 3,000ish 17psi then tapers down to 14psi after 5,000rpm due to wastegate controlling
Does the vehicle have Cams? yes Poncams

Made 226kw on 14psi yesterday with a reeeallly strong midrange compared too
car making 213kw on 16psi with internal gate last month,

will post up dyno sheet after i pick car up today

Edited by DVS JEZ, 10 September 2008 - 05:46 AM.


#117 Cobolt Spec_R

  • Joined:22-April 06
  • Location:Australia WA
  • Car:Nissan 200sx s15

Posted 14 September 2008 - 03:18 PM

Make and model: S15
Size of engine: 2.x ltr
Modifications to the car: 3" zorst, pod, trust fmic, bov, bored block with oversized JUN pistons rest stock, vct removed, bikirom, gfb mbc
Type of turbo: T28 bush bearing
Trim of turbo: n/a
Rear Exhaust housing: n/a
When does vehicle begin boost: 2.6
When does vehicle reach full boost and what PSI: 3k 10psi then steady spike at 5k for 12psi till 6800 (weird tune) limiter 9k
Does the vehicle have Cams? if so; no
What brand:
What lift/duration etc:
Max power achieve at what boost: 196kw @ wheels on 12psi

#118 Guest_HyperGear Turbochargers_*

Posted 27 September 2008 - 05:29 PM

Make and model: S13 silvia
Size of engine:1.8L CA18det
Modifications to the car: ACL Pistons, 700cc injectors, Tomei cam gears, ported engine head. Fuel pump, Nistune ECU
Type of turbo: HyperGear ATR28 400HP rated
Rear Exhaust housing:0.84
When does vehicle begin boost:2000rpm
When does vehicle reach full boost and what PSI:4500 18PSI
Does the vehicle have Cams? Regrinded stock cams 256/8.9

Did 2 dyno runs: first run 18psi made 248rwkws 908N.M of torque
Attached Image: atr28ca248kw18psi.jpg


2nd run 19.5psi made 268rwkws 976N.M Torque, Boost controller poped half way through dyno run. Will be replacing it for another dyno run next week.
Attached Image: atr28ca268kw20psi.jpg

#119 Phobos

  • Joined:06-October 07
  • Location:Australia VIC
  • Car:Nissan Silvia S14a

Posted 01 October 2008 - 01:05 PM

Make and model: 200sx S14a
Size of engine: SR20DET
Modifications to the car: Full exhaust, Trust FMIC, EBC, Cold air intake, S15 injectors, E-manage Blue, pump
Type of turbo: stock S14a ADM turbs
Trim of turbo: n/a
Rear Exhaust housing: n/a
When does vehicle begin boost: 2200rpm
When does vehicle reach full boost and what: 15psi at 3000rpm
Does the vehicle have Cams?: no

Max power achieve at what boost:191rwkw@14.5psi

#120 crzy_1via

  • Joined:28-October 06
  • Location:Australia VIC
  • Car:Nissan 180sx sr20DET

Posted 21 October 2008 - 10:50 AM

Make and model: Nissan 180sx
Size of engine: SR20DET 1998cc
Modifications to the car: fmic, straight through 3 inch zorst, cast manifold, 38mm ext gate with screamer, z32 afm, nismo 740cc injectors, power FC, walbro gss341 fuel pump, dual core radiator.
Type of turbo: Hypergear TR43
Trim of turbo: T3
Rear Exhaust housing: 0.64
When does vehicle begin boost: 2500 rpm
When does vehicle reach full boost and what PSI: 3800 rpm
Max power achieve at what boost: 220rwkw@18psi

should reach more with less boost as the tune is shithouse, and ill be relocating the afm to the throttle body side of the cooler piping as there is a bit of turbulence. these turbos are awesome but they are really underestimated.





2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users

Common Links

  • About Us
  • Privacy Policy
  • User Agreement
  • Help & Support Forums
  • Advertise
  •  

    By your continued use of this site, you agree to follow all Rules & Guidelines and abide by the User Agreement outlined in our Terms & Conditions.

    Hardtuned Network is hosted by Sanity Technology

    Design, Site Management & Hotness provided by Loz.

    Big thanks to all our members and volunteers for making this network what it is today!